| Type: | Water-Cooled |
|---|---|
| Cooling Method: | Water-cooled |
| Unit Structure: | Integral |
| Selected Voltage: | 380V/50HZ |
| Compressor Number: | 1 |
| Noise Level: | Low |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Direct Cooling Falling-film Magnetic Chiller for Aluminum Profile Anodizing.
KINGFIT launches the fifth generation of its Aluminum profile anodizing direct cooling falling film screw chiller in an effort to avoid the shortcomings of flooded type screw chiller, such as poor stability, environment damage, high costs on repair and maintenance etc.
Falling-film Chiller advantages:
(1). Improving Stability:
Falling-film type its evaporation lubricants with leave on the bottom, the consistency of oil is much more higher than flooded type, and the oil level of the bottom of evaporator will up little. It will be easy for oil rupturing and reduce the maintenance cost through induct oil method.
(2). Energy efficient:
With the use of R134A environmentally friendly refrigerant having ODP at 0 and 10%~100% stepless adjustment, part of the load under different rectifier loads used for the optimization of operational control, which helps achieving precise and wide range temperature control. The min. starting current only 2A, which helps reducing the impact on the grid.
The outlet temperature is accurate to +/_ 0.1deg. C, so as to improve the uniformity of the anodizing solution.
No need plate heat exchanger, chilled water pump and tank to save installation space and investment.
High efficient and energy saving: max. NPLV as high as 36.8, electric consumption is 32KWH/ton for oxidation GB aluminum profiles, 0.38KWH/pc for hard anodizing pot, 60% energy saving than world famous brand chillers.
Technical parameters
| MODEL | QL530SJABXC | ||
| Cooling Capacity | 738KW (Basis on anodizing conditions) | ||
| NPLV | 17.45 | ||
| Power Supply | 3Ph 380V/50HZ | ||
| Input Power | 91KW | Max. Running Current:180A | |
| Compressor | Mode | Magnetic | |
| Way to unload | Stepless | ||
| Refrigerant | R134A | ||
| Wiring Specification (mm) | 95 | ||
| Condenser | Mode | High Efficient External Screwed Shell & Tube | |
| Inlet Temp. | 30ºC | ||
| Outlet Temp. | 35ºC | ||
| Cooling Water Flow ( M³/h ) | 142.7 | ||
| Hydraulic Resistance ( Kpa ) | 65 | ||
| Evaporator | Mode | High efficiency falling-film type. | |
| Acid solution Inlet temp. | 20ºC | ||
| Acid solution Outlet Temp. | 18ºC | ||
| Acid solution Flow Rate ( M³/h ) | 316.5 | ||
| Hydraulic Resistance ( Kpa ) | 63 | ||
| Safety Protection | Acid pump interlock protection, leakage protection, overload protection, overpressure and anti-phase protection, refrigerant abnormality protection, compressor over temperature protection, type pressure valve protection, oil pressure protection, and lack of water protection etc. | ||
| Pipe Connection | Cooling Water In & Outlet | DN150 | |
| Chilled Water In & Outlet | DN200 | ||
| Overall Size | Length (mm) | 3000 | |
| Width (mm) | 1450 | ||
| Height (mm) | 1700 | ||
| Weight (Kg) | 2800 | ||
Here is a true story of the founding brothers of KINGFIT - just a couple of ordinary boys who started out small in 1998 to pursue their big vision to explore and meet the real needs of the market, offering unprecedented solutions in terms of customization, innovation, and efficiency. Their steadfast commitment to bring the best lead to revolutionizing the industry and triggering widespread success in the market.
The new millennium brought our company a constantly growing reputation that propelled us beyond the national borders with a greater purpose. Fully understanding our customers and business partners to provide tailor-made solutions that best fit their requirements allowed KINGFIT to grow exponentially. That lead the company to develop an extensive knowledge of an ample range of industries, pushing KINGFIT to branch out into three major markets with a vast array of intelligent and energy-efficient climate solutions for agriculture, temperature solutions for various industries, and air conditioning systems around the globe.
Today KINGFIT is run by an ever-expanding brilliant team of hundreds of passionate professionals with an unchanged vision to persistently improve at all levels - serving customers with the unparalleled quality and efficiency we've become renowned for in the last 23 years. And continues to meet and exceed all our customer's rising expectations, and support them on the journey towards a world where only real Efficiency can guarantee a truly Sustainable Future for everyone.
Why choose us:
Our service
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After-Sales Service
* Training how to install the machine, training how to use the machine.
* Free spare parts replacement within warranty period.
* Professional after-sales department to provide technical support, all complaints should be replied within 24 hours.
* Engineers available to service machinery overseas.
FAQ
1. Are you manufacturer or Trade Company?
We are professional factory, founded in 1998. OEM available!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}