- Model NO.: QTI-XT
- Control: Electric
- Structure: Integral Type
- Application: Commercial, Industrial
- Filtering Device: Without Filtering Device
- Power Supply: 380V/50Hz/3pH
- Transport Package: wooden case
- Origin: ZheJiang China
- Ice shape: Tube
- Power: >400W
- Material: Stainless Steel
- Condensing Mode: Water-Cooled
- Automatic Cleaning Device: Without Automatic Cleaning Device
- Trademark: QINGFENG
- Specification: it depends on the model
1. Hollow tube of Irregular length
2. Hard ice with water content ≤ 2%
3. Outside diameter is ø 22mm, ø 29mm, ø 35mm
4. Length is 20mm ~ 50mm
5. Inside diameter is generally between ø 5mm~ø 10mm, can be adjusted according to Ice time
>>Tube Ice Machine mainly used for daily consumption
>>All surfaces in contact with water or ice are of stainless steel or other rust-rssistant materials.
>>Packing Way: Packed in air bubble film inside, then in Wooden box outside
>>Tube Ice Machine has been installed and tested before delievery, only needs customers to connect the water pipes and power.
>>High efficiency and energy-saving: The reasonable system design insures the high refrigerating efficency
Tube ice machine series space saved, high effect and energy saving, system intelligent control, it is a kind of well distributed vortex water film forming ice system, ice maker adopt full stainless steel material, meet eat sanitary standard, forming ice with nice shape. Machine design with cut ice and filter water equipment.
Tube ice is a kind of hollow cylindrical ice with external diameter 22mm, 29mm, 35mm and length 25-42mm. The hole diameter is usually 5-10mm and it can be adjusted according to ice making time.
Features: Tube ice is thick and transparent with long storage period, it is not likely to melt in a short time, good air permeability.
Ice making principle of the ice tube machine:
After the refrigeration system working normally, the water in the bottom watertank transported to the inlet of the upper water bin from the outlet by the chilling pump, the water go through the water segregation in the way of screw style flow along the inner wal of the recuperator tube flowing downward to make the heat exchange with the refrigerant on the surface of recuperator tube. In this case the temperature is reduced, some water feeze into ice tube in the inner recuperator tube, and the rest water in low temperature goes back to the bottom water bin, the water circulating again and again in this way, and the cooling capacity is in little loss.
Full automatically: PLC system control the whole ice making process.
Application: It can be directly eaten or used in cold drinks, wine, cool foodstuffs, make ice pastries and keep seafood fresh etc.
| compressor input|
|compressor||refrigerant||cooling method||weight of machine|| machine dimension|
|QTI-1T||1000||-15º C||3.69||Mabeurop||R404A/R22||water cooling||1000||1400*800*1800|
|QTI-2T||2000||-15º C||7.11||Bitzer||R404A/R22||water cooling||1200||1400*1100*1800|
|QTI-3T||3000||-15º C||9.68||Bitzer||R404A/R22||water cooling||1300||1500*1100*1950|
|QTI-5T||5000||-15º C||18.84||Bitzer||R404A/R22||water cooling||2000||1600*1250*2200|
|QTI-10T||10000||-15º C||36.6||Bitzer||R404A/R22||water cooling||3000||1500*2100*2200|
|QTI-20T||20000||-15º C||75.36||Bitzer||R404A/R22||water cooling||6500||1500*3500*2200|